PLAYport - Media player set up

This article is about set up the PLAYport HD.

Wired Connection Wireless connection
  1. Plug In your PLAYport Media player. It needs to be connected to the monitor with HDMI, a Ethernet connection to your network and be powered.
    If you choose to power it over USB the unit need 2.5A to work properly. We recommend to use the included power adapter from a wall socket.

  2. Change the source on the monitor until you see the media player starting up. To change source use the Input, Source, Or Menu -button on the remote. You may have to cycle through a few sources before finding the correct one. (e.g. HDMI1, HDMI2, etc.)

  3. The unit will start up and show 3 circles. If the circles are green then the unit have connection to PLAYipps servers.  if the circles are red restart the Media player. If 3 green circles still don't appear you need to troubleshoot your network connection. See our troubleshooting guide here

  4. An activation code will appear on the screen.
    Read the article about Activation code for instructions about how to activate the Media player. 
Was this article helpful?
3 out of 8 found this helpful



Please sign in to leave a comment.