LG WebOS - Installation of the PLAYipp software

This is a guide on how to install the PLAYipp software on a LG screen with an internal media player in LG signage series with WebOS 3 or higher.

First you need to control which screen you have to find the correct guide. Below you will find a list to all of the supported screens.

WebOS 4.0

Type Series Inch Specification
Standalone  SH7E 43, 49, 55 700 nit
24/7 usage
SM5KE 32, 43, 49, 55 450 nit
24/7 usage

LG WebOS 3.2 (3.0+)

Type Series Inch Specification
Standalone SM5D 32, 43, 49, 55, 65 450 nit
24/7 usage
SM5KD 32, 43, 49, 55, 65 450 nit
24/7 usage

LG WebOS 3.0

Type Series Inch Specification
Standalone LS73C 42, 49, 55 500 nit
24/7 usage
LS75C 42, 49, 55 700 nit
24/7 Usage
LS73D 42, 49, 55  500 nit
24/7 usage
SM3C 43, 49, 55 350 nit
24/7 usage
SM5C 32, 43, 49, 55, 65 450 nit
24/7 usage
SM5KC 32, 43, 49, 55, 65 450 nit
24/7 Usage
Windowfacing XS2C 75 2500 nit
24/7 usage
XS2E 49, 55, 75 2500 nit
24/7 usge

Installation guide

WebOS 4.0WebOS 3.2WebOS 3.0
  1. Start the screen.
  2. Choose quick start
  3. Enter the following settings:
    Screen rotation, choose between landscape (horizontal) or portrait (vertical) depending on the setup.
    Time and date
    Auto power = off
  4. Choose go to settings
  5. Connect to a network
    If Ethernet shall be used connect the cable on the back of the screen and verify that the screen have a network connection. You can verify that you have a connection from the menu. Settings > General > Network.
    To connect to wifi:
    1. Navigate to Settings > General > Network > Wi-Fi Connection
    2. Select network
    3. Enter a password if needed
    4. Once the screen is connected proceed to the next step.
  6. Choose Settings > Ez-settings > SI-servers settingsSI-servers settings
  7. Enter the following settings:
    Fully qualified domain name = ON
    Enter: https://webos.playipp.com/PLAYipp.ipk 
    Application launch mode = Local
    Application type = ipk
  8. Choose Local application upgrade = remote
  9. Confirm the app update
  10. Press Ok when the update is complete
  11. Reboot the screen
  12. At startup the screen will display three green circles if the player have an internet connection. If three red circles appears then there is no internet connection. If so, click here to follow our troubleshooting guide.


After the PLAYipp software has started the activation code will be displayed on the screen.
screenshot.png
Read the article about Activation code for instructions on how to activate the media player.

Was this article helpful?
1 out of 1 found this helpful

Comments

0 comments

Please sign in to leave a comment.